3 Series E36 M3 (S52) SAL
Pierce sealing cover (5) on side.
Lever out sealing cover (5) in hole with a screwdriver.
Installation:
Replace sealing cover.
Engage a gear by hand.
Grip output flange with special tool 23 0 020 .
Release screw (6).
Caution!
Left-hand threads.
Remove washer (7).
Disengage selected gear again.
Grip output flange with special tool 23 0 020 .
Release collar nut (1) with special tool 23 2 320 .
Detach output flange with special tool 33 1 150 .
RA Removing and installing complete drive and output shafts (S5D 260Z / 310Z / 320Z
BMW AG - TIS
10.02.2013 06:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -