3 Series E36 M3 (S52) SAL
Fit synchronizer ring on 3rd gear taper.
Heat 3rd/4th gear guide sleeve to approx. 80
°
C (hot air blower).
Fit guide sleeve with long collar (1) facing 3rd gear wheel.
When fitting, make sure driver lugs (2) are flush with recesses on
guide sleeve.
If necessary, press the guide sleeve on to fit tight with help of
special tool 23 1 290 .
Heat bearing inner race (3) to approx. 80
°
C (hot air blower) and
attach to countershaft.
If necessary, press it on to fit tight with help of special tool
33 1 342 .
Insert 3 thrust pieces (1) and 3 pressure springs (2) in recess in
guide sleeve.
RA Disassembling and assembling all synchronizing mechanisms (S5D 260Z / 310Z / 320
BMW AG - TIS
10.02.2013 07:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -