3 Series E36 M3 (S52) SAL
![background image](/bmw/3_Series_E36/M3_S52_SAL/page-433005.png)
Fit cable with holder and screw on bearing shell.
The cable must remain easily movable axially in the holder.
Turn ignition key to zero position.
Remove ignition key.
Check interlock/shiftlock function.
Press locking lever downwards and tighten down screw for cable
mounting.
Tightening torque 8 Nm.
Check interlock/shiftlock function.
RA Removing and installing selector lever with mounting block - version with interl
BMW AG - TIS
10.02.2013 07:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -