3 Series E36 M3 (S52) SAL
Remove screw and pull off clip.
Press retaining hook and pull off switch.
Unscrew earthing cable.
Remove both headless screws and take off starter switch.
Installation:
Lock headless screws with varnish.
Lift out snap ring (1) and take off with sleeve (2).
Installation:
Fit bush (2).
Fit snap ring (1) with special tool 32 1 090 and steering
wheel retaining screw until it engages in groove of steering
spindle.
Snap ring (1) can also be mounted using special tool
32 3 070.
RA Disassembling and assembling complete steering column
BMW AG - TIS
10.02.2013 08:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -