3 Series E36 M3 (S52) SAL
Installation:
Clamping instructions (mounting block shown as sectional view).
1
Apply light coat of grease to anti-friction surfaces of
bearing block (3) and steering column tube (9).
2
Pre-assemble adjustment lever (4) with dowel pin
(2) in lever setting "jammed" to
dimension (A) = 21.5
+0.2
-0.5
then slide firmly
home to right side.
3
Screw bolt (5) in until it contacts stud (2).
4
Push lever (4) to left. Square shoulder of bolt must
engage in outer tube (9).
5
Tighten new nut (1) in "jammed" lever position to
torque of 7 Nm.
6
Check clamping effect.
RA Disassembling and assembling complete steering column
BMW AG - TIS
10.02.2013 08:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -