3 Series E36 M3 (S52) SAL
Important!
No oil permitted on shaft journal thread!
Lightly oil spline teeth of output shaft.
Insert output shaft into drive flange.
Screw special tool 33 2 118 / 33 2 119 onto output shaft.
Mount special tool 33 2 116 with three wheel studs to drive
flange.
Draw in output shaft with special tool 33 2 115 up to stop; in so
doing, grip basic body 33 2 116 with special tools 33 2 202
and 33 5 070 .
RA Pressing output shaft out of drive flange and drawing in (output shaft removed f
BMW AG - TIS
10.02.2013 09:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -