3 Series E36 M3 (S52) SAL
41 00 ...
Frame alignment control dimensions of body, side view of BMW E 36 4-door/2-
door/touring
Dimensions in mm,
Tolerance: dimension over 1000 mm
±
2.0 mm,
Tolerance: dimension up to 1000 mm
±
1.0 mm.
Deviating dimension for 2-door in brackets, hinge dimensions not applicable to 2-door.
Dimensions for rear window aperture not applicable for touring.
Note:
Only use the indicated values for a rough inspection.
Repairs can only be carried out correctly with the approved set of attachments and a straightening bench.
A
Front impact absorber support, without attached
front trim panel
B
Front spring support
C
Vehicle jack front take-up point
D
Vehicle jack rear take-up point
E
Support (inner) for semi-trailing arm
F
Support (outer) for semi-trailing arm
G
Supports for shock absorber
H
Back support on rear axle
I
Bore in trunk floor
∅
20 mm
K
Top front hinge shaft
L
Lower front hinge shaft
M
Hinge shaft, rear top
N
Lower rear hinge shaft
RA Frame alignment control dimensions of body, side view of BMW E 36 4-door/2-door/
BMW AG - TIS
10.02.2013 10:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -