3 Series E36 M3 (S52) SAL
Version with seat heating (backrest):
If necessary, cut through cable tie (1 ... 3).
With lumbar support version:
If necessary, pull on foam rubber (4) and cut through hose
connection at angle joint.
Installation:
Check function.
Version with seat heating (backrest):
If necessary, disconnect connector
disconnect plug, unlock plug receptacle, pull off and guide through
seat-cushion shell.
Installation:
Check function.
Only Coupé with mechanical seat adjustment:
Pull off retainer.
Installation:
Backrest lock must engage correctly.
Move cable laterally back and forth in the holders so that the cable
"settles" (free of play!).
Caution!
Do not pull on cable.
Use new retainer.
RA Removing and installing/replacing backrest shell on left or right front seat
BMW AG - TIS
10.02.2013 13:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -