3 Series E36 M3 (S52) SAL
Manufacturer: AMP
Ultrasonic-welded connectors:
Ultrasonic-welded connectors (1) can be identified by the welds
(2) on their longitudinal side.
The contacts of these connectors cannot be replaced. The plug
must be replaced completely.
Note:
Special tools referred to in the repair instructions below are
contained in the following special tool kits:
Release and press-out tool
Replaced as from 09/2005 by:
61 1 150
61 0 300
61 0 400
Repair instructions for opening plug housings and removing contacts of different plug systems
For plug contact systems not listed, refer to Service Information:
SI 2 05 05 217
SI 2 05 06 294
SI 2 08 06 312
Plug system D 1.5/D 2.5:
•
Circular plugs, 7-, 8-pin, System D 2.5
•
Circular plugs, 13-pin, System D 2.5
•
Circular plugs, 20-pin, System D 2.5
•
Circular plugs, 4-, 7-, 10-, 12-, 25-pin, System D 1.5/D 2.5
•
In-line plugs, 15-pin, System D 2.5
•
In-line plugs, 8-, 12-pin, System D 2.5
•
In-line plugs, 30-pin, System D 2.5
RA Opening plug housings and removing contacts of different plug systems
BMW AG - TIS
10.02.2013 14:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -