3 Series E36 M3 (S52) SAL
Cut through wire loop in wiring harness at established point.
Strip insulation from both wire ends.
Refer to repair instructions:
Cutting to length and stripping insulation from cables
Crimp contact sleeves on both wire ends.
Refer to repair instructions:
Crimping on stop parts
Note:
If using repair kit for contact sleeves, refer to repair instruction
Butt connector for repairing a plug connection.
Crimp connecting cable for retrofitting likewise with contact sleeve.
Cut required number of poles to length for fan connectors.
RA Installing fan connector for retrofitting/repairs
BMW AG - TIS
10.02.2013 14:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -