3 Series E36 M3 (S52) SAL
62 10 ...
Brief description of the test functions:
Test-function display:
Test 01 Roll mode with system test (sequence as before on E36/4).
Test function 01 enables the workshop to conduct a short test of the instrument cluster. Once the function has been
started, at display intervals of 3 seconds, the following information is displayed in the LCD:
Display and point allocation in trip-distance and mileometers (GWSZ/TWSZ)
MW scope of delivery
6 digits
1
Code No. of data set
5 digits
2
k-number
4 digits
3
- - - - - -
6 digits
4
Software version
2 digits
5
Amendment index
2 digits
6
Next, the microprocessor moves the pointer (speedo, tachometer, tank, coolant temperature) uniformly to limit position
and back. All LCD segments are activated for this period of time. The test procedure then terminates automatically.
Premature termination occurs when the trip-distance-counter button is pressed with terminal R OFF or continued
selection after terminal 15 and also when travel impulses arise. In the latter case, the prevailing km reading is displayed
once again.
Test 02 Engine data
Display of engine factor stored in EEPROM for speed signal evaluation; e.g. "3" engine factor 3.
Test 03 Elapsed and evaluated SI mileage in km
The type of the next service due (lubrication or inspection) is indicated by selecting the relevant letters displayed in the
service-interval indicator (SIA).
e.g. GWSZ - - 8750 = SIA OILSERVICE - INSPECTION
or GWSZ - 22450 = SIA OILSERVICE - INSPECTION
Basic value not assessed:
Petrol-driven engines: oil service at 12000 km, inspection at 24000 km
Diesel engines: first oil service at 10000 km, second oil service at 20000 km, inspection at 30000 km
Test 04 Elapsed SI days with piloting of clock symbol
Maximum 716 days based on 2 years
Test 05 SI assessment factors fn and ft (0 or 1)
Currently dependent on engine speed and coolant temperature;
Presentation: n0 or n1...t0 or t1, where n is the speed factor and t is the temperature factor.
Shaft speed threshold
Petrol-driven engines 4512 min
-1
Diesel 3808 min
-1
Test 06 Tank fill quantity and coolant temperature
Display of values for tank contents and coolant temperature unfiltered.
RA Brief description of the test functions:
BMW AG - TIS
10.02.2013 15:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -