3 Series E36 M3 (S52) SAL
Unscrew nut and take off belt tightener.
Installation:
Press seatbelt tensioner against stop (1) and tighten nut.
Tightening Torque,
refer to Technical Data 72 11 1AZ
Pyrotechnical belt tensioner:
Remove orange plug connection (1) for belt tensioner.
Open cable connector (2).
Installation:
Secure wire with cable tie (2) so that orange plug connection
is not under strain.
Unscrew bolt (1).
Remove belt tensioner.
Tightening Torque,
refer to Technical Data 72 11 1AZ
Note coding of belt tensioner at seat:
1.
Bolt
2.
Belt tensioner
3.
Lock washer
4-door models:
Release safety belt screw from seat.
Installation:
Tightening Torque,
refer to Technical Data 72 11 1AZ
RA Removing and installing/replacing front seat belt
BMW AG - TIS
10.02.2013 17:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -