3 Series E36 M coupe (S54) COUPE
18 00 020
Removing and installing complete exhaust
system (Z3 / S54)
Important!
Support exhaust system with lifter; note that the two rear
mufflers make the exhaust system heavier at the rear that at
the front.
Disconnect plug connections on both monitor sensors.
Release screw connection for temperature sensor.
Release screw connections (1) between exhaust manifold and
catalytic converter.
Installation:
Check gaskets, replace if necessary.
Replace self-locking nuts.
Coat threads with -CRC- copper paste, refer to BMW Parts
Service.
Release hexagon screw (1) for mounting on rear muffler on rear
axle carrier on left and right.
RA Removing and installing complete exhaust system (Z3 / S54)
BMW AG - TIS
09.02.2013 19:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
