3 Series E36 M coupe (S54) COUPE
Remove scrap metal. Straighten and grind joint surfaces.
Clean connection point on spare tail panel and coat with zinc dust
paint.
Coat connection points on the body with zinc dust paint.
Adjust spare part for tail panel to fit.
While doing so, watch position of rear apron spare part:
Rear apron spare part (1) is located under side section (2) and
over wheel housing extension (3).
RA Replacing tail panel (Z3 Coupé)
BMW AG - TIS
10.02.2013 00:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -