3 Series E36 M roadst (S54) ROADST
11 25 530
Removing and installing/replacing all pistons
(S54)
(engine removed)
Fit engine to special tool 00 1 450 .
•
Removing cylinder head
•
Removing oil pan
•
Removing oil pump
Caution!
Re-install piston, conrod and bearing shells back in the same
position and in the same installation location.
Conrod and conrod bearing cover are designated with same
pair number: do not interchange / confuse.
In event of heavy oil carbon residue:
Carefully remove oil carbon residue from cylinder wall.
RA Removing and installing/replacing all pistons (S54)
BMW AG - TIS
09.02.2013 20:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -