3 Series E36 M roadst (S54) ROADST
Installation:
Check adapter sleeves (1) for damage and correct installation
position.
Caution!
After working on throttle system (throttle assembly,
servomotor, potentiometer), carry out electronic throttle test
with DIS Tester or MoDiC without fail:
-
Service functions
-
DME system checks
-
Function test
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Removing and installing/replacing throttle actuator (S54)
BMW AG - TIS
09.02.2013 22:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -