3 Series E36 Z3 (M43TU) ROADST
Caution!
Open-end wrench can slip off tensioning rail.
Slowly and carefully push back tensioning rail with open-end
wrench and remove strain from chain.
Remove chain wheel and chain from camshaft.
Remove oil line to camshaft lubrication.
Release bearing cap.
Remove camshaft.
Installation
Installation of camshaft is described separately from removal.
Assembly sequence differs between removal and installation.
RA Replacing camshaft (M43TU)
BMW AG - TIS
10.02.2013 21:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -