3 Series E36 Z3 (M43TU) ROADST
Clean connection points on front side section on B-pillar.
Clean connection points on outer B-pillar.
Coat connection points on front side section on B-pillar and outer
B-pillar with zinc dust paint.
Coat connection points on vehicle with zinc dust paint.
Adjust front side section of B-pillar (1) to fit outer B-pillar (2) and
secure.
Weld connection points.
Set in area of (1) brazed seam.
Grind down connection points.
RA Replacing cover for left side member (front door pillar removed) (Z3)
BMW AG - TIS
11.02.2013 02:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
