3 Series E36 Z3 (M52) ROADST
31 21 080
Replacing left or right steering knuckle
Removing bearing (wheel hub)
refer to 31 21 180.
Pull off tie rod with special tool 32 2 070.
Installation:
Replace self-locking nut.
Tightening torque,
refer to Technical Data 32 21 3AZ.
Remove guard plate.
Unscrew bolts.
Installation:
Clean tapped bores in steering knuckle. Always replace
micro-encapsulated bolts.
Tightening torque,
refer to Technical Data 31 21 4AZ.
RA Replacing left or right steering knuckle
BMW AG - TIS
11.02.2013 03:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
