3 Series E36 Z3 (M52TU) ROADST
straps around the bow and by boring/riveting from the rear.
-
Fit soft top seal in the soft top box with 2-layer butyl seal.
-
On vehicles manufactured up to and including December 1996, two additional
tensioning cables should be replaced, running from the
1st bow to the side retaining brackets (window guide). To do this, the tensioning
cables in the new hood covering must be removed (please refer to Electronic Parts
Catalogue, attachments for soft top, illustration
number 15).
Parts:
Hood covering
Part number 54 31 8 411 121
Repair kit rivets
Part number 54 31 8 407 994
Butyl tape (50m roll)
Part number 51 71 8 411 063
Front support rail
Part number 54 31 8 398 922
In addition on vehicles manufactured up to and including December 1996:
Repair kit tensioning cables, part number 54 31 8 400 953
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms as follows:
Defect code
54 31 91 69 00
This defect code is not contained in the official
defect code catalogue but has been included in
the system. This will enable warranty claims to be
processed.
Hood covering worn through:
Job number
00 51 310
Labour
53 FRUs
Warranty type
1
Warranty stage
1 (within vehicle warranty)
2 (outside vehicle warranty)
Reimbursement is only possible until December 1999.
SI Soft top abrasion areas E36 Z3 roadster
BMW AG - TIS
10.02.2013 23:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
