3 Series E36 Z3 (M52TU) ROADST
25 11 000
Removing and installing shift lever
Pull shift lever knob off by hand with a sudden jerk.
Pulling-off force: approx. 400 N.
Lift and pull cover off shift lever.
Remove foam rubber cover (if fitted).
Lift off retainer (1).
Remove window (2).
Remove selector rod (3).
Installation:
Coat bearing with Klüber Polylub GLY 801 (refer to BMW
Parts Service).
Fit special tool 25 1 110 and rotate counter-clockwise through
90
°
.
Press up bearing shell.
RA Removing and installing shift lever
BMW AG - TIS
11.02.2013 03:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -