Replacing Battery Positive Lead for Z3 M54 Roadster
Release nut (2).
Installation:
Tightening torque, 12 51 4AZ.
Disconnect battery positive lead (3) from connection point.
Release nut (1).
Installation:
Tightening torque, 12 41 4AZ.
Disconnect battery positive lead from starter motor.
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Replacing battery positive lead Z3 M54 (between starter motor and B+ support poi
BMW AG - TIS
11.02.2013 02:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
