3 Series E36 Z3 (M54) ROADST
12 61 285
Replacing level switch for engine oil (Z3 M54)
Turn off ignition.
Release oil filter cap so that engine oil from oil filter can flow
back into oil pan.
Release screws.
Remove cruciform reinforcement (1).
Remove underbody paneling.
Drain engine oil.
Disconnect plug connection (1).
Release nuts (2).
Remove level switch (3).
Installation:
Clean sealing surface on oil sump and replace level switch seal.
Installation:
Fill system with engine oil.
Resecure oil filter cap.
Tightening torque, 11 42 2AZ.
RA Replacing level switch for engine oil (Z3 M54)
BMW AG - TIS
11.02.2013 02:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -