3 Series E36 Z3 (M54) ROADST
Remove the defective gear unit (2) with hammer and cold chisel
(1):
Place cold chisel (1) between gear (2) and upper seat runner (3),
first place at one end and lever out gear (2).
Then lever out other end of gear (2) until it detaches itself from
seat runner (3).
If necessary, remove second gear in this manner.
-
Remove gear cables from guide screws.
-
Insert screwdriver into end of guide screw.
Twist guide screws alternately on both sides until the screws
and nuts on both sides can be removed.
-
Remove front seat and adjuster from car.
-
Adjustment mechanism must be replaced.
RA Additional work (normal/electric) in event of faulty drive for longitudinal adju
BMW AG - TIS
11.02.2013 09:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -