3 Series E36 Z3 (M54) ROADST
Pull off connectors.
Installation:
Connect plug (1).
Push on locking clip (2).
Installation:
Locking clip (1) must be snapped into place so that plug (2)
cannot be detached!
Check that locking clip (1) is correctly secured.
Unfasten screws.
Remove airbag module (3).
Installation:
Always replace micro-encapsulated screws!
Tightening Torque,
refer to Technical Data 72 12 1AZ
RA Removing and installing/replacing airbag module in front door, left or right (Z3
BMW AG - TIS
11.02.2013 12:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
