3 Series E46 316i (M43TU) SAL
00 00 ...
Resetting service interval indicator according
to factory specifications
Special tools required:
•
61 1 110
For vehicles with diagnosis socket in engine compartment:
Necessary preliminary tasks:
•
Switch ignition on.
•
Attach resetter (special tool 61 1 110) to diagnosis socket
in engine compartment
Resetting engine oil service
Press yellow button (1) for engine oil service.
Green lamp (2) lights up.
Wait until yellow lamp (3) lights up and then goes out again.
Check that oil service indicator has been reset.
Reset service
Press red button (1) for inspection.
Green lamp (2) lights up.
Wait until red lamp (3) lights up and then goes out again.
Turn off ignition, wait 20 seconds and repeat procedure in order to
adapt interval of annual inspection to inspection.
Check that service interval indicator has been reset.
RA Resetting service interval indicator according to factory specifications
BMW AG - TIS
19.01.2013 10:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
