3 Series E46 316i (M43TU) SAL
Release oil tank for hydraulic steering and tie back to one side.
Note:
Lines remain connected.
Unfasten vane pump for power steering unit from alternator carrier
and tie up to one side (lines remain connected).
Remove manifold lower section,
refer to 11 61 044.
Caution!
Follow instructions for removing and installing fuel hoses,
refer to 13 53 540.
Detach water hoses from engine.
Unfasten the wiring harness section for the engine.
Remove transmission,
refer to 23 00 022 / 24 00 025.
Attach engine to special tool 11 0 070.
Unfasten right ground wire.
Unscrew left and right engine mounts.
Automatic transmission:
Release oil lines from engine carrier and from oil pan.
Lift out engine.
RA Removing and installing engine (M43TU)
BMW AG - TIS
19.01.2013 10:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -