3 Series E46 316i (M43TU) SAL
11 14 110
Removing and installing, sealing or replacing
bottom timing case cover (M43 / M43TU)
Remove timing case cover at top,
refer to 11 14 100.
Remove vibration damper,
refer to 11 23 010.
Remove hub for vibration damper,
refer to 11 23 031.
Release belt pulley.
Release screws.
Remove gear case cover, bottom.
Installation:
Check dowel sleeves.
Replace seal.
Coat the seal on the front and rear ends thinly with
Drei Bond 1209, refer to BMW Parts Service.
RA Removing and installing, sealing or replacing bottom timing case cover (M43 / M4
BMW AG - TIS
19.01.2013 10:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
