3 Series E46 316i (M43TU) SAL
11 14 141
Replacing radial seal in bottom timing case
cover (M43 / M43TU)
Remove vibration damper,
refer to 11 23 010.
Remove hub for vibration damper,
refer to 11 23 031.
Fit special tool 11 2 313 on crankshaft.
Screw in special tool 11 2 310 so far until it is rigidly connected
with radial sealing ring.
Remove radial sealing ring by tightening in the screw.
Coat sealing lips of new radial sealing ring with oil.
Using special tool 11 4 150 and central screw, install radial seal
until flush with timing case cover.
RA Replacing radial seal in bottom timing case cover (M43 / M43TU)
BMW AG - TIS
19.01.2013 10:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
