3 Series E46 316i (M43TU) SAL
11 23 010
Removing and installing or replacing
vibration damper (M43 / M43TU)
Special tools required:
•
11 2 150
•
11 2 410
If necessary, remove drive belt and belt pulley for the air-
conditioning compressor.
Remove alternator drive belt.
Model with vibration damper and hub - two parts:
Release screws and remove vibration damper.
Installation:
Installation location of vibration damper is secured by a dowel pin.
Replace screws.
Tightening torque 11 23 3AZ.
Model with vibration damper and hub - one part:
Attach special tool 11 2 150 in conjunction with special tool
11 2 410 .
When releasing and tightening down central bolt, grip special
tool 11 2 150 with assistance of a second person.
If it is not possible to grip the tool securely: Remove mounted
parts until the special tool 11 2 150 can be supported on the
engine carrier without damaging other components.
Caution!
Protect engine bracket from damage.
Insert wood between special tool 11 2 150 and engine carrier.
Unscrew central bolt.
RA Removing and installing or replacing vibration damper (M43 / M43TU)
BMW AG - TIS
19.01.2013 10:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
