3 Series E46 316i (M43TU) SAL
11 25 530
Removing and installing or replacing all
pistons (M43 / M43TU)
(engine removed)
Removal
Removal of pistons is described separately from installation.
Assembly sequence for removal and installation is different.
Remove cylinder head,
refer to 11 12 500.
Remove oil pan,
refer to 11 13 500.
M43TU only:
Remove balancing shaft housing,
refer to 11 27 610.
Caution!
Re-install piston, connecting rod and bearing shells back in
the same position and in the same installation location.
Connecting rods and bearing covers are designated with the
same pair number: do not mix them.
RA Removing and installing or replacing all pistons (M43 / M43TU)
BMW AG - TIS
19.01.2013 10:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -