3 Series E46 316i (M43TU) SAL
11 41 000
Removing and installing / replacing oil pump
(M43 / M43TU)
Remove timing case at bottom,
refer to 11 14 115.
Release screws, remove oil-pump cover.
Lift out rotor set.
Note:
Outer and inner rotor form a matched pair and must always be
replaced as a set.
Caution!
Strong spring force.
Using a suitable drift, press spacer down until circlip is no longer
under strain.
Remove circlip, remove control valve.
Installation sequence:
1.
Control valve
2.
Coil spring
3.
Space bush
4.
Circlip
RA Removing and installing / replacing oil pump (M43 / M43TU)
BMW AG - TIS
19.01.2013 10:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
