3 Series E46 316i (M43TU) SAL
Installation:
Sealing faces clean and free of seal debris.
Replace seal.
Installation:
In the case of models with non-return valve made of
aluminium, the non-return valve is not separable from the
housing of the main flow oil filter.
Replace the sealing ring on the non-return valve.
Installation:
In the case of models with non-return valve made of plastic,
the non-return valve is separable from the housing of the main
flow oil filter.
Replace the sealing rings on the non-return valve.
Caution!
Check installed direction.
RA Removing and installing, sealing / replacing complete main flow oil filter (M43
BMW AG - TIS
19.01.2013 10:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
