3 Series E46 316i (M43TU) SAL
Release front side trim panel partly and fold forward.
Battery in luggage compartment under floor trim panel
Follow instructions for disconnecting and connecting battery.
Fold back floor trim panel (1).
Lift cover (2) on battery negative lead.
Disconnect and cover battery negative lead (3).
Release nuts (4).
Remove battery cover.
Battery in luggage compartment under spare wheel
Remove spare wheel.
Release screws.
Caution!
Do not kink air pipes.
Set air supply system (1) to one side.
Follow instructions for disconnecting and connecting battery.
Disconnect battery negative lead.
Disconnect supply cable (1) for vehicle electrical system.
Installation:
Remove faulty fuses and carry out troubleshooting.
RA Replacing safety battery terminal (SBK)
BMW AG - TIS
19.01.2013 11:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
