3 Series E46 316i (M43TU) SAL
12 63 520
Replacing main relay
Switch off ignition.
Connect DIS Tester.
Release screws (1).
Remove electronics box cover.
Installation:
Correctly install wiring harness with grommet in electronics box
cover (water tightness).
Hook cover (3) into hinges of underside of electronics box (1).
Then correctly install upper stop (2) above hinges on underside
of electronics box.
Arrangement:
1.
Main relay of Digital Motor Electronics
2.
Engine fuses of Digital Motor Electronics
RA Replacing main relay
BMW AG - TIS
19.01.2013 11:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
