3 Series E46 316i (M43TU) SAL
Release nut (3) and remove clamping bracket.
Turn fuel pressure regulator and remove.
Installation:
Replace sealing rings (1) and (2). When replacing, observe
nominal pressure stamped on fuel pressure regulator; only
regulators with the same nominal pressure may be fitted.
Further information on troubleshooting in:
Checking fuel delivery pressure,
refer to 13 31 029
Installation:
Pressure regulator must be pushed firmly home to enable the
clamping bracket to be fitted.
Version 2:
Version with a retaining bracket:
Remove retaining bracket (2).
RA Replacing fuel pressure regulator (M42, M43, M43TU, M44)
BMW AG - TIS
19.01.2013 11:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
