3 Series E46 316i (M43TU) SAL
13 63 555
Replacing throttle potentiometer (M43,
M43TU, M44)
Turn off ignition.
Disconnect plug connection.
Release screws (1).
Installation:
Make sure sealing ring is installed in correct position.
It is not necessary to adjust throttle potentiometer (self-
adjusting).
Read out fault memory of DME control module, check stored
fault messages, rectify faults, cancel fault memory.
RA Replacing throttle potentiometer (M43, M43TU, M44)
BMW AG - TIS
19.01.2013 11:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
