3 Series E46 316i (M43TU) SAL
b13 64 541
Removing and installing/replacing all fuel
injectors
Necessary preliminary tasks:
•
Switch off ignition.
•
Remove injection pipe.
Lever out tab washer and remove fuel injector.
Installation:
Check sealing rings of fuel injectors for damage and replace if
necessary.
To facilitate installation, coat sealing rings with antiseize
agent.
Installation:
Read out fault memory of control unit of Digital Motor Electronics
(DME).
Check stored fault messages.
Rectify faults.
Now clear the fault memory.
RA Removing and installing/replacing all fuel injectors
BMW AG - TIS
19.01.2013 11:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
