bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Fuel Supply System E46 (spark Ignition Engines)|Page 789 > < 1 RA Fuel Supply System E46 (diesel Engines)|Page 787
Page 1
background image

16 00 

Fuel supply system E46 (spark ignition engines)

1. General

General function description for fuel systems.

2. Parts designation

1. Fuel tank (plastic)

18. Roll-over valve

2. Electric fuel supply pump

19. Float valve (USA only)

3. Surge chamber

20. Fuel filter

4. Pressure limiting valve

21. Pressure regulator

5. Outlet protection valve

22. 3/2-way valve (M52 USA, M73 only)

6. Suction jet pump

23. Fuel rail

7. Tank expansion line

24. Engine control unit

8. Non-return flap

25. Intake manifold

9. Filler pipe

26. Tank vent valve

10. Tank cap

27. Purge line

11. Pressure test line (USA only)

28. Vent line

11. Refueling vent line (worldwide)

29. Vacuum line (LDP USA only)

12. Fuel feed line 

30. Evaporation line

13. Fuel return line

31. Carbon canister

14. Service vent line

32. Carbon canister (USA only)

15. Refueling vent line (USA only)

33. Leakage diagnosis pump (USA only)

15. Additional vent line (Japan)

34. Dust filter (USA only)

16. Service vent line 

35. Tank leakage diagnostic module (USA only)

17. Expansion tank

3. Function description (see also drawing 5.1 / 5.2 / 5.3 / 5.4)

Fuel system

The saddle-shaped fuel tank contains the surge chamber with the electric fuel feed supply pump on its right side. 

The surge chamber ensures that the fuel supply pump is properly supplied in all vehicle operating states. 

The fuel is repumped from the right side of the fuel tank into the surge chamber via the suction jet pump integrated in

the tank expansion line. The suction jet pump is operated via the fuel feed line. 

The pressure limiting valve controls the pressure required to operate the suction jet pump. The outlet protection valve

protects the fuel return line. The valve closes in the event of a pressure drop when the fuel return line is damaged or
disconnected. 

This prevents fuel from escaping from the fuel tank in extreme vehicle positions (overturning, inclined position). 

The non-return flap prevents fuel from splashing back in the filler pipe after shutdown of the petrol/gas pump nozzle.

Fuel supply to engine:

RA  Fuel supply system E46 (spark ignition engines)

BMW AG - TIS

19.01.2013  11:12

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Fuel Supply System E46 (spark Ignition Engines)|Page 789 > < 1 RA Fuel Supply System E46 (diesel Engines)|Page 787