3 Series E46 316i (M43TU) SAL
16 12 001
Removing and installing / replacing fuel level
sensor (left) (complete unit)
Sucking the fuel out of the fuel tank,
refer to 16 00 005
Remove rear bench seat.
Fold floor trim panel (1) forwards.
Cut insulating mat (2) at perforation and fold back, releasing
rubber grommet in process.
Release hexagon nuts (1) and remove cover (2).
Installation:
Check seal for cover (2), replace if necessary.
Release hose clip (1) and disconnect hose (2).
Unfasten plug connection (3) and disconnect.
RA Removing and installing / replacing fuel level sensor (left) (complete unit)
BMW AG - TIS
19.01.2013 11:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
