3 Series E46 316i (M43TU) SAL
Draining coolant:
Release cap (1) on expansion tank.
If necessary, remove assembly underguard at front.
Grip radiator adjusting screw (2) and release drain plug (1) on
radiator at bottom.
Drain, catch and dispose of coolant.
Installation:
Replace drain plug (1).
Observe Tightening Torque,
refer to 17 11 2AZ
.
Release drain plug (1) on engine block.
Drain, catch and dispose of coolant.
Installation:
Replace sealing ring.
Observe Tightening Torque,
refer to 11 11 5AZ
.
Adding coolant:
Release vent screw (1).
Venting takes place during filling.
RA Draining and adding coolant M43TU
BMW AG - TIS
19.01.2013 11:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
