3 Series E46 316i (M43TU) SAL
17 11 100
Removing and installing/replacing coolant
expansion tank M43TU
Warning!
Danger of scalding, this work should only be carried out when
the engine is cooled down.
Note:
Follow instructions for working on cooling system,
refer to 17 00 ...
Remove intake filter housing.
Remove assembly underguard at front.
Drain coolant from radiator,
refer to 17 00 005.
Unfasten plug connection (1) and disconnect.
Withdraw lock (2).
Replace expansion tank:
Unlock coolant level sensor (1) by turning and remove towards
bottom from expansion tank.
RA Removing and installing/replacing coolant expansion tank M43TU
BMW AG - TIS
19.01.2013 11:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
