3 Series E46 316i (M43TU) SAL
Note:
Locking pins (1) or locking hooks of special tool 21 2 190 must
engage in openings in SAC clutch.
Set SAC clutch (1) down on a clean surface.
Install special tool 21 2 190 in SAC clutch (1).
Press special tool 21 2 190 together at handles (1) as far as it
will go and grip firmly.
At same time tighten down knurled screws (2).
Adjustment ring of SAC clutch is now secured in its original
position (wear position).
Important!
Do not reset adjustment ring to new position.
Note:
Insert special tool 21 2 170 only in area of bores for dowel pins.
RA Removing and installing or replacing clutch (SAC 228 / 4 cyl. without M47TUE)
BMW AG - TIS
19.01.2013 11:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
