3 Series E46 316i (M43TU) SAL
Note:
Before installing special tool 21 2 190 in SAC clutch: Adjust
locking pin to "A" or "B".
A
SAC clutch with plastic adjustment ring
B
SAC clutch with steel adjustment ring
Preliminary setting:
Pull out handle (1) and through 180
°
into position "A" or "B".
Note:
Locking pins (1) or locking hooks of special tool 21 2 190 must
engage in openings in SAC clutch.
Set SAC clutch (1) down on a clean surface.
Install special tool 21 2 190 in SAC clutch (1).
Note:
Insert special tool 21 2 170 only in area of bores for dowel pins.
RA Removing and installing or replacing clutch (SAC 228 / 4 cyl. without M47TUE)
BMW AG - TIS
19.01.2013 11:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
