3 Series E46 316i (M43TU) SAL
Important!
Handle clutch plate with care, do not touch surfaces of friction
linings.
Install clutch plate in correct position.
Pay attention to text "engine end" / "transmission side".
Center clutch plate (1) with special tool 21 2 142 .
Note:
special tool 21 2 250
E46 from 09/03 N40/42/45/46
Fit SAC clutch (1) on flywheel.
Pay attention to dowel pins (2).
SAC clutch (1) must be secured by way of dowel pins (2).
Install retaining screws of SAC clutch and tighten down.
Tightening torque: 21 21 1AZ
.
Release spindle (1) until tension is completely removed from
diaphragm spring (2).
RA Removing and installing or replacing clutch (SAC 228 / 4 cyl. without M47TUE)
BMW AG - TIS
19.01.2013 11:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
