3 Series E46 316i (M43TU) SAL
Note:
The ignition cables and plugs may be damaged if the engine
is tilted back. Therefore release nuts and remove ignition coil
(1) from fixture (2).
Caution!
The section "Removing and installing reinforcement plate"
contains important installation instructions.
Remove reinforcement plate.
Remove engine underguard (1).
Remove underbody protection (1 ... 2).
RA Removing and installing transmission (S5D 200G, M43TU)
BMW AG - TIS
19.01.2013 11:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -