3 Series E46 316i (M43TU) SAL
23 00 032
Installing replacement transmission
(S5D 200G / 250G)
Note:
After completion of work, check transmission oil level.
Transmissions are supplied filled with oil.
Important!
Use only the approved gear oil in this manual transmission.
Failure to comply with this requirement will result in serious
damage to the transmission.
Drain off gear oil.
Remove and install transmission.
Install release unit and release lever in new transmission.
Recycling:
Catch and dispose of emerging gear oil.
Observe country-specific waste-disposal regulations.
RA Installing replacement transmission (S5D 200G / 250G)
BMW AG - TIS
19.01.2013 11:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
