3 Series E46 316i (M43TU) SAL
23 30 ...
Replacing catch pin (S5D ...Z and GS5-39DZ /
C- and F-transmissions)
Special tools required:
•
00 1 450
•
23 0 170
•
23 0 490
•
23 2 360
•
23 3 110
Necessary preliminary tasks:
•
Remove gearbox
Place transmission (1) with special tool 23 0 170 in assembly
stand 00 1 450 .
Stamp a small hole into sealing cover (e.g. with scribing tool).
Screw special tool 23 0 490 into sealing cover.
Drive out sealing cover upwards.
Caution!
Do not damage edge of bore hole in transmission housing. A
burr or a dent may cause the sealing cover to leak.
RA Replacing catch pin (S5D ...Z and GS5-39DZ / C- and F-transmissions)
BMW AG - TIS
19.01.2013 11:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
