3 Series E46 316i (M43TU) SAL
Lever retaining ring (1) out of groove with a small screwdriver.
Push retaining ring (1) towards rear.
Drive out straight pin (2).
Screw in special tool 23 0 210 until it is firmly connected to radial
seal (1).
Pull out radial seal with special tool 23 0 210 .
Coat sealing lips of radial seal and selector shaft with gear oil.
Drive in radial seal with special tool 23 0 220 .
RA Replacing radial seal for selector shaft (S5D 200G / 250G)
BMW AG - TIS
19.01.2013 11:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
