3 Series E46 316i (M43TU) SAL
Brace output flange with special tool 23 0 020 .
Unfasten collar nut with special tool 23 1 210 .
Tightening torque: 23 21 1AZ
.
Installation:
Insert collar nut with Loctite 243 screw securing adhesive
(sourcing reference: BMW Parts Service).
Detach output flange with special tool 33 1 150 from output
shaft.
RA Replacing output flange for transmission (S5D 200G / 250G)
BMW AG - TIS
19.01.2013 11:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
